Floatation equipment/Fengde Machinery

Floatation equipment: 1. High efficiency 2. High quality and high capacity 3. Easy operation 4.ISO9001

Floatation equipment

Working principle

  The impelIer rotates by triangIe belt of the motor,whih produces centrifugal function and causes negative pressure.0n one hand it draws in enough air mixed with ore magma; on the other hand it agitates to mix ore magma with chemicaI medicines.At the same time,it minifies bubbles so that minerals can stick above them.float on the su- rface of magma,and form mineralized bubbles.The height of plate can be adjusted to control fluid Ievel so that the avaIlable bubbles can be scrapped out by scrapers.

Features of Floatation equipment

 The Floatation Machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.

Floatation equipment Application:

Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.

Technical parameters of SF Floatation equipment

Model		SF0.37	SF0.7	SF1.2	SF2.8	SF4
Trough capacity(m3)		0.37	0.7	1.2	2.8	4
Blade diameter(mm)		300	350	450	550	650
Production capacity(m3/min)		0.2-0.4	0.3-0.9	0.6-1.2	1.5-3.5	0.5-4
Blade rotation speed(m3/min)		352	400	312	268	238
Motor	Model	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y180L-6
		Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
	Power(kw)	1.5	3	5.5	11	15
		1.1	1.1	1.1	1.1	1.5
Dimensions(mm)		700*700*750	900*820*950	1100*1100*1100	1700*1600*1150	1850*2050*1200
Single trough weight(kg)		468	600	1373	2338	2660

Floatation equipment/Fengde Machinery